Product Description
180 Amp 6 Wire Slip Ring for Wind Turbine Generators
Keep your cable from twisting in the tower.
These 180 Amp 6 wire slip rings are small and compact with OD 30.00 mm x L 66 mm, standard, off-the-shelf. Color-coded lead wires are used on both the stator and rotor for simplified electrical connections, using a 90° V-groove ring design for each ring.
Not recommended for use with 48V wind turbines
These slip rings are ideal for our Freedom II PMGs and dual core PMAs.
Slip Ring Specifications:
| Wires | 6 |
| Voltage | 600 VDC/VAC |
| Overall diameter | 30 mm |
| Contact Material | Precious Metal: gold-gold |
| Housing Material | Plastics |
| Working life | depends on working speed |
| Dielectric strength | 1000VDC@50Hz |
| Insulation resistance | 1000MO@500VDC |
| Operating Temp. | -40°C to 80°C |
| Mechanical vibration | MIL-SID-810E |
| Materials | Lead Free, RoHS compliant |
| Current | 0~30A per wire (6 wires at 30 amps = 180 amps) |
| Max speed | 250 RPM |
| Length | 66 mm |
| Contact Resistance | <2m Ohm |
| Torque | 0.06N.m |
| Electrical noise | <10mO |
| Lead Wire | UL Teflon® Awg 12 |
| Lead Lengths | 250 mm |
| Protection | IP51 |
| Humidity | 10% to 90% RH |
| CE Certified | YES |
How To Install a Slip Ring Video
Notes:
- The operational life of the unit is dependent upon rotational speed, environment and temperature.
- Lead Wire size: 8A -> AWG16,15A -> AWG16,30A -> AWG12 colored code.
- Electrical noise is dependent upon the rotating speed and current,voltage.
