8000 Watt 48VDC 120/240VAC Power Inverter
8000 Watt 48 volt to 120/240 VAC Power Inverter Charger
UL Listed model!
Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible and backed by an ETL certification to UL 1741 standards.
The most common use for this inverter is emergency backup power or off-grid systems for residences, businesses and remote power needs. You'll always be prepared for the next power outage with access to 8,000 watts of continuous power and 24,000 watts of surge (for up to 20 seconds). AIMS has added a "pump" output for inductive loads providing a smoother start up for motors and pumps. The auto-generator start port is also a great feature for emergency backup power, as it will automatically kick on your generator when it senses your battery bank getting low.
However, we recommend recharging your battery bank with our solar panels - a cleaner form of power.
One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 8,000 watt capacity and harness its 300% surge power (up to 24,000 watts for 20 seconds as previously noted).
Have a hunting cabin or off-grid vacation home? This AIMS Power inverter is perfect for supplying reliable electricity to the entire house.
This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it's protected from humidity or airborne dust and dirt by virtue of its marine-coated (or "conformal-coated") boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.
The inverter is split-phase and will output 110/120 VAC or 220/230/240 VAC, and it can output 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet.
- 8000 Watt low frequency inverter 110/120/220/230/240 VAC Split Phase
- 24000 Watt surge for 20 seconds -3x surge capability
- ETL Listed to UL 1741 Standards
- CSA STDC 22.2 NO.107.1
- Battery priority selector
- AC direct connect terminal block
- Marine coated and protected
- Multi stage smart charger 80 Amp
- Three cooling fans - thermal and load based
- Remote panel available
- 60hz or 50 hz selectable dip switch
- 10msec typical transfer time
- Mounting plate included
- Selectable 25W power save mode (hibernation)
- 8 battery charger settings
- 4 stage battery charger
Inverter Output Specifications:
- Continuous Output Power: 8000 Watts
- Surge Rating: 24000 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- 100-110-120VAC / 220-230-240VAC
- Nominal Efficiency: >88% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 7% under full linear load
- Nominal input voltage: 48.0VDC
- Low battery alarm: 42.0VDC-44.0VDC
- Low battery trip: 40.0VDC-42.0VDC
- High voltage alarm: 64.0VDC
- Low battery voltage restart: 62.0VDC
- Idle consumption: 100 Watts
- Power saver mode idle consumption: <25 Watts
- Output voltage: Depends on battery Type
- Charger Rate: 80A
- Unit weight: 132 lbs.
- Unit size L x W x H: 23.3 x 16.3 x 7.9 inches
- Shipping weight: 176 lbs.
- Shipping size L x W x H 30 x 21.25 x 15.25 inches
Click here to download the product manual