All In One Sky440 Charge Controller Board with Optional Inverter
Our All in One SKY440 Hybrid Charge Controller Board provides a complete, pre-wired solution for your battery based system. Choose between 12, 24, and 48 Volt pre-programmed options without inverter, or opt for the pre-wired, pre-programmed board with inverter for 12 or 24 volt systems.
Charge Controller Features:
Dual meters:
Each meter displays voltage, wattage, amperage and watts per hour from each charging source.
Dual microprocessor controlled for stability and accuracy
Multiple user changeable settings and trip points for many various system requirements and applications.
You can change the dump point voltage level, end of dump voltage level, and length of time in divert mode when end dump point voltage is reached (between 0 to 999 seconds, or 0 to 999 minutes)
Isolated Electronics Protection - Almost impossible to accidentally connect wind or solar directly to the circuit board
On board relay isolates electronics from back voltage spikes from large 440 amp relay. This is important to get the longest life out of the electronics. No one else has this!
High amp rating: 440 amps, 10,000 watts; 100 amps continuous for the solar side.
Can divert the charging source from the batteries to the load or dump both the batteries along with the charging source
Connect both wind or hydro and solar at the same time
Reverse polarity protection
MidNite Solar MNEPV 100 Amp and 63 Amp 150VDC Din Rail Breakers
Optional Power Inverters available for 12 and 24 Volt systems:
| Voltage: | 12V System | 24V System |
| Rated Power: | 2500 Watts | 2500 Watts |
| Peak Power: | 5000 Watts | 5000 Watts |
| Input Voltage: | 12 VDC | 24 VDC |
| Output Voltage: | 110 / 120 VAC +/- 5% | 110 / 120 VAC +/- 5% |
| Unload Current: | <0.8 Amps | <0.5 Amps |
| Output Frequency: | 60Hz +/- 0.5Hz | 60Hz +/- 0.5Hz |
| Output Waveform: | Modified Sine Wave | Modified Sine Wave |
| USB Port: | 5V 1A | 5V 1A |
| Max Efficiency: | 90% | 90% |
| Input Voltage Range: | 10-15.5V | 20-31V |
| Low Voltage Alarm: | 10.5 +/- 0.5V | 21 +/- 0.5V |
| Low Voltage Protection: | 10 +/- 0.5V | 20 +/- 0.5V |
| Over Voltage Protection: | 15.5 +/- 0.5V | 31 +/- 0.5V |
| Low Voltage Recover: | 12.3 +/- 0.5V | 24 +/- 0.5V |
| Over Voltage Recover: | 14.8V +/- 0.5V | 29.5V +/- 0.5V |
| Working Temperature | 14°F to 122°F (-10°C to +50°C) | 14°F to 122°F (-10°C to +50°C) |
| Warranty: | 2 year Manufacturer | 2 year Manufacturer |
| Dimensions: | 11.7 x 7.1 x 5.04 inches (298 x 180 x 128 mm) | 11.7 x 7.1 x 5.04 inches (298 x 180 x 128 mm) |
| Weight: | 9.81 pounds | 9.81 pounds |
| Features: | Modified sine wave output (THD<3%), Soft-start technology, High Efficiency, Aluminum case for optimum heat dissipation, LED Indicator lights for power and protections, Intelligent cooling fan to extend inverter lifespan, USB Charging Port | Modified sine wave output (THD<3%), Soft-start technology, High Efficiency, Aluminum case for optimum heat dissipation, LED Indicator lights for power and protections, Intelligent cooling fan to extend inverter lifespan, USB Charging Port |
