Solar PV Cable #8 AWG UL Approved (by the foot)

Solar PV Cable #8 AWG UL Approved Cross-Linked Polyethylene Insulated18 - 750 MCM • 2000 Volts • -40°C to 90°C Wet and Dry DescriptionPhotovoltaic cable has a chemically cross-linked polyethylene insulation. ApplicationsAppropriate for...

MC4 Solar Disconnect Spanner Wrench

This is a multi-contact solar connector disconnect spanner tool for assembling and disassembling MC4 male/female connectors. This tool is very light yet strong. Its small size and double-quick screw down make it easy to use, saving you time in...

Two Foot Battery Cables with Professional Quality Terminal Ends

24 Inch Battery or Inverter Connection Cable Factory made tin plated copper terminal ends Finished with our quality heat shrink tubing and sealed cable ends Factory made tin plated copper terminal ends fit 5/16 inch studs *Note that overall assembled...

One Foot Battery Cables with Professional Quality Terminal Ends

12 Inch Battery or Inverter Connection Cable | Fine Stranded Cable for DC Connections Factory made tin plated copper terminal ends Finished with our quality heat shrink tubing and sealed cable ends Factory made tin plated copper terminal ends fit 5/16...

12/6 SJOO 3 Phase Wind Turbine Cable

Our SJOO cable is exactly what you need for our three phase Freedom permanent magnet alternators. The 12/6 cable is the correct choice for the Freedom 2000 watt model dual stator wind turbines. AC medium output runs to your bridge rectifier or 3-phase...

12/3 SJOO 3 Phase Wind Turbine Cable

Our SJOO cable is exactly what you need for our three phase Freedom permanent magnet alternators. The 12/3 cable is the correct choice for the Freedom 1600 watt model wind turbines.AC medium output runs to your bridge rectifier or 3-phase grid tie...

10/3 SJOO 3 Phase Wind Turbine Cable

Our SJOO cable is exactly what you need for our three phase Freedom permanent magnet alternators. The 10/3 cable is the correct choice for the Freedom 1600 watt model wind turbines.AC medium output runs to your bridge rectifier or 3-phase grid tie...

50 Amp Quick Connect Terminal Block

50 Amp Three Position Quick Connect Terminal Block  Product Features: For 20-8 wire 6.25" x 1.00"x 0.99" high 0.53"(13.5mm) terminal centers UL Listed Flexible Nylon 66 Body 94V2 rated for 105 degrees Celsius 400 Volts All metal parts are...

Solar PV Cable #10 AWG UL Approved (by the foot)

Solar PV Cable #10 AWG UL Approved 600 Volt - Double Jacketed Copper - Direct Burial Description: Our photovoltaic cable has a chemically crosslinked polyethylene insulation with a sunlight resistant PVC jacket. Applications: Appropriate for use in...

10 AWG Solar Panel PV Extension Cable with MC4 Connectors

All cables are manufactured with genuine multi-contact MC4 connectors and #10 AWG use-2/rhw-2 rated wire. 600 VDC10 AWG PV CableCable Standards:Underwriters Laboratories Standards UL-44, UL-854Federal Specification A-A-59544NEMA WC70/ICEA S-95-658NFPA...

Inverter Cables with Professional Quality Terminal Ends #6

Inverter Cable #6 AWG High quality fine stranded copper inverter cable #6 AWG - pre-finished high quality. One black and one red flexible cable. Features: Factory made copper terminal ends, tin plated Terminal ends have 3/8" center hole Quality...

Inverter Cables with Professional Quality Terminal Ends 4/0

Inverter Cable 4/0 AWG High quality fine stranded copper inverter cable 4/0 AWG - pre-finished high quality. One black and one red flexible cable. Features: Factory made copper terminal ends, tin plated Terminal ends have 3/8" center hole Quality...