MidNite Solar Classic 200 SL MPPT Charge Controller

MidNite Solar Classic SL-200 MPPT Charge Controller The Classic SL-200 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 200 with streamlined menus. The Classic SL-200 has a graphics panel and ground fault but no arc fault or...

MidNite Solar Classic 150 SL MPPT Charge Controller

MidNite Solar Classic SL-150 MPPT Charge Controller The Classic SL-150 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 150 with streamlined menus. The Classic SL-150 has a graphics panel and ground fault but no arc fault or...

3 Foot Cable for the MidNite Network

3 foot cable for the MidNite network. Used to network MidNite products together. Warranty - 5 yrs. * Made in the USA

MidNite Solar WhizBang Jr

MidNite Solar WhizBang Jr The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID Charge controllers to give Amperage readings from the shunt. This allows for End Amps to function...

MidNite Solar Kid MPPT Charge Controller for Hydro and Wind

The KID for Hydro and Wind is a 30a 150v MPPT charge controller. It features tracking algorithms specifically designed to maximize power harvest from your hydro or wind turbine. The KID allows you to charge battery banks at your custom settings from...

Charge Controller to Battery Connection Cables with Lug Terminals

Charge Controller to Battery Connection Cables with Lug Terminals Available in #10 AWG or #4 AWG. Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery. Each pair is made from high-quality...

Charge Controller to Battery Connection Cables with Alligator Clamps

Charge Controller to Battery Connection Cables with Alligator Clamps #10 AWG - UL Approved - 600 Volt - Double Jacketed Copper   Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery...

200 Amp Solid State Charge Controller with Digital LED Volt Meter for Wind Turbines and Solar Panels

200 Amp Solid State Charge Controller with Digital LED Volt Meterfor Wind Turbines and Solar Panels  Benefits of Solid State Relay: Lower power consumption Lower operating voltages Higher reliability Longer electrical life expectancy Higher...

12 Volt or 24 Volt Digital Programmable Charge Controller & Relay Driver Module

Built in digital display and intelligent dual processor controller The charge controller has an internal relay capable of switching up to 10 amps or 30 amps of wind or solar. For 10 amp models: If you will be switching more than 10 amps of power,...

100 Amp Solid State Charge Controller with Digital LED Volt Meter for Solar Panels

Available in 12 and 24 Volts Benefits of Solid State Relay: Lower power consumption Lower operating voltages Higher reliability Longer electrical life expectancy Higher input-to-output isolation No contact bounce or arcing Physically smaller Lower...

All In One Sky440 Charge Controller Board with Optional Inverter

Our All in One SKY440 Hybrid Charge Controller Board provides a complete, pre-wired solution for your battery based system. Choose between 12, 24, and 48 Volt pre-programmed options without inverter, or opt for the pre-wired, pre-programmed board with...

SkyMax MPPT 60 Amp Charge Controller

Don't worry about adding too much solar! Controller has automatic self limiting feature. As long as your panels are wired within the voltage range, the controller will limit the output to the battery at the maximum rating. This feature will gain you more...