Digital Clamp Meter for DC & AC Current

Write a Review
  • High Precision Clamp Meter
  • High Precision Clamp Meter Features and Settings


High Precision Clamp Meter

Troubleshoot your system components with this high precision clamp meter.  Measures AC and DC voltage, current, resistence, and capacitance.

NCV Detection Function: Non-contact voltage detection to check status through measuring EM field intensity without contacting any wiring.

Shutdown: If there is no operation within 15 minutes, the meter will beep three times, then auto power off after 30 seconds to save battery power.

Z/F Button Measurement: Press the Z/F button to switch the secondary function between different measurements such as AC and DC.  If current is greater than 3A, the display will light up.


Technical Range Precision
DC Voltage 600mV/6V/60V/600V/600V ±(0.5%+3)
AC Voltage 6V/60V/600V/600V ±(0.8%+3)
DC Current 6A/60A/600A ±(2.5%+5)
AC Current 6A/60A/600A ±(2.5%+5)
Resistance 6000/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(1.0%+3)
Capacitance 10nF/100nF/1µF/100µF/1mF/20mF/100m ±(4.0%+3)
Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+5)
Duty Cycle 1% - 99% ±(1.0%+2)
Temperature -40°F - 1832 °F ±(1.0%+2)

Clamp Meter Features:

  • Automatic/Manual Range
  • Continuity Measurement
  • Diode Measurement
  • Data Hold
  • NCV Non-Contract Voltage Detection
  • Backlight
  • Flashlight
  • DC Current Zero
  • Low Voltage Indication
  • Full Range Protection
  • Automatic Shutdown
  • True RMS
  • Low Pass Filter
  • Max/Min Measurement


  • Power: Requires (2) AAA Batteries (not included)
  • Weight: 9.1 oz
  • Size: 7.6 x 2.87 x 1.33 inches
  • Clamp Size: Ø1*1.73 inches
View AllClose

0 Reviews

View AllClose