null

Divert Dump Loads

Protect your wind turbine with a dump load. Choose from high quality individual resistors or pre-wired resistor banks to keep your wind turbine under a load.

  • 600 Watt Dump Load Main

    600 Watt Dump Load (2 Resistor Bank)

    600 Watt Divert Load Resistor BankThis divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be...

    $83.99
    Choose Options
  • 1200 Watt Diversion Dump Load Main

    1200 Watt Diversion Dump Load (4 Resistor Bank)

    This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used with a solar array in diversion...

    $131.99
    Choose Options
  • 300 Watt Diversion Dump Load Resistor

    300 Watt Diversion Dump Load Resistor

    300 Watt Divert Load Resistor This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used...

    $9.55
    Choose Options
  • 1000 Watt Dump Load Resistor

    1000 Watt Dump Load Resistor

    This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality double wire wound design. It can also be used with a solar array...

    $45.58
    Add to Cart
  • MidNite Clipper

    MidNite Solar Clipper

    Generally speaking if your turbine has larger than a 10 foot rotor diameter and or is rated for 2.5KW or more you may need more than one clipper. Please consult tech support The MidNite Clipper is designed to control Wind or Hydro turbines and work with...

  • Short Bridge Aluminum Resistor Bar

    Short Bridge Aluminum Resistor Bar

    Short Bridge Aluminum Resistor Bars Use the short bridge aluminum resistor bar to connect two dump load resistors together as shown in the additional images. Product Specifications: 1 5/8 x 1 1/16 x 1/8 inches 4 grams  

    $1.29
    Add to Cart
  • Long Bridge Aluminum Resistor Bar

    Long Bridge Aluminum Resistor Bar

    Long Bridge Aluminum Resistor Bars Use the long bridge aluminum resistor bars to connect four or more dump load resistors together as shown in the image below Product Specifications: 4 5/8 x 1 1/2 x 1/8 inches 22 grams The bridge bar pair can also be...

    $3.79
    Add to Cart
  • 3 5/8 Inch DC Cooling Fan with Wires

    3 5/8 Inch Delta 12 Volt Fan

    DC Fan Specifications: Voltage: 12 Volts DC Current: 0.75 Amps CFM: 85 Plastic blades & housing 47.5 DB noise Ball bearing 11 inch leads Locked rotor output (stall sensor): open collector Transistor 5-28 Volts DC MA maximum UL/CSA/VDE/CE...

    $8.09
    Add to Cart

Missouri Wind and Solar BBB Business Review