null

Divert Dump Loads

Divert Dump Loads

Protect your wind turbine with a dump load. Choose from high quality individual resistors or pre-wired resistor banks to keep your wind turbine under a load.

  • 600 Watt Dump Load Main 600 Watt Dump Load Side

    600 Watt Dump Load (2 Resistor Bank)

    Missouri Wind and Solar

    €78,47
    600 Watt Divert Load Resistor Bank This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be...
    €78,47
  • 1200 Watt Diversion Dump Load Main 1200 Watt Diversion Dump Load Side

    1200 Watt Diversion Dump Load (4 Resistor Bank)

    Missouri Wind and Solar

    €123,32
    1200 Watt Diversion Dump Load This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used...
    €123,32
  • 1500 Watt Diversion Dump Load Main 1500 Watt Diversion Dump Load Side 1

    1500 Watt Diversion Dump Load (5 Resistor Bank)

    Missouri Wind and Solar

    €138,27
    1500 Watt Diversion Dump Load This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used...
    €138,27
  • 300 Watt Diversion Dump Load Resistor 300 Watt Diversion Dump Load Resistor

    300 Watt Diversion Dump Load Resistor

    Missouri Wind and Solar

    €9,86
    300 Watt Divert Load Resistor This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used...
    €9,86
  • 1000 Watt Dump Load Resistor 1000 Watt Dump Load Resistor with Cooling

    1000 Watt Dump Load Resistor

    Missouri Wind and Solar

    €18,68
    This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality double wire wound design. It can also be used with a solar array...
    €18,68
  • Short Bridge Aluminum Resistor Bar Detail Short Bridge Aluminum Resistor Bar Detail

    Short Bridge Aluminum Resistor Bar (Pair)

    Missouri Wind and Solar

    €1,21
    Short Bridge Aluminum Resistor Bars Use the short bridge aluminum resistor bar to connect two dump load resistors together as shown in the additional images. Product Specifications: 1 5/8 x 1 1/16 x 1/8 inches 4 grams  
    €1,21
  • Long Bridge Aluminum Resistor Bar Long Resistor Connector Bar

    Long Bridge Aluminum Resistor Bar

    Missouri Wind and Solar

    €3,54
    Long Bridge Aluminum Resistor Bars Use the long bridge aluminum resistor bars to connect four or more dump load resistors together. Product Specifications: 4 5/8 x 1 1/2 x 1/8 inches 22 grams Bars sold individually Two bridge bars can also be used to...
    €3,54
  • 3 5/8 Inch DC Cooling Fan with Wires 3 5/8 Inch DC Cooling Fan 1 1/2 Inch Wide

    3 5/8 Inch 12 Volt Fan

    €7,56
    Applications: Can be used on solar and wind systems or projects. You can direct connect to an existing diversion load on many diversion charge controllers for cooling resistor heaters Air circulation in small areas Venting battery compartments, etc...
    €7,56