- Home
- Wind Products
- PMAs and PMGs
- PMA & PMG Parts & Components
- Gold Zinc 17mm Steel Split Lock Washer
Description
Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear.
Specifications:
Inner Diameter | 18 mm |
Outer Diameter | 27 mm |
Thickness | 3 mm |
Weight | .2 oz |
Related Products


80 mm Double Pulley for ½ Inch Belts
Missouri Wind and Solar
$22.10
Double Pulley for 1/2 Inch BeltsPulley Specifications: For permanent magnet alternators with 17mm shaft Pulley fits 1/2" beltsGold zinc plated If you have a problem with your PMA overheating it may...

17 mm Steel Split Lock Washer
$0.50
Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear.Specifications:
Customers Also Viewed

1.5 Inch Non-Plated Yaw Bearing
Missouri Wind and Solar
$6.33
Unplated Yaw Bearing for 1 1/2 Inch Diameter Wind Turbine Towers Improve your wind power output by improving your wind tracking! Add our 1 1/2" unplated yaw bearing to your wind turbine tower...

Rotor Shaft for Permanent Magnet Alternators
Missouri Wind and Solar
$15.95
Rotor Shaft For Permanent Magnet AlternatorThis rotor shaft fits Delco 10SI/12SI alternator. Perfect for building your own Permanent Magnet Alternator for wind turbines and hydroelectric generators...


Cooling Fan for PMA or PMG with 17mm Shaft
Missouri Wind and Solar
$15.30
A large extra heavy duty cooling fan must be used for all engine, hydro, and or belt driven systems including vertical axis wind turbine applications. Wind turbines usually have enough air...

PMA Stator Coil
Missouri Wind and Solar
$43.33
If you are using a stator for hydro or motor driven applications and need 24 volts, use the 12 volt regular stator. **Make sure to use our fan and pulley for all hydro or motor driven applications...


Wind Turbine Hub Spacer & Stabilizer
Missouri Wind and Solar
$13.50 - $22.62
The wind turbine hub spacer fits all wind turbine hubs with a 17 mm center, adds support, stops vibration, and stops hubs from bending and flexing in high winds!
Model SHS-KEY:
Compatible with...

Delco 10/SI PMA Case with Bearings
$59.99
Delco 10/SI PMA Case with BearingsOur PMA case comes with 4 bolts and heavy duty front and rear bearings. A perfect match for all Missouri Wind PMA parts. Perfect for building your own project, use...