Lug Terminal Hammer Crimp Tool

This simple, inexpensive crimping tool can be used to crimp connectors, lugs, terminals, splicers, on #8 (3.264 mm, 8.37 mm2) through #4/0 AWG (11.684 mm, 107 mm2) wire. Spring loaded pin locks in up position for loading connector and cable. When released, the pin holds the connector securely during crimping. Use with a hammer or vice.

Though not quite as easy as the professional production crimpers for large lugs, this crimper is also about $300 cheaper.

8 AWG - 4/0 Crimp Tool - use with hammer or vise. Use this crimp tool to make professional connections using our wind turbine cable and terminals. Use with all crimp terminal lugs, including heavy cast lugs.

Features:

• Lugs and splicers are secured by spring tension during installation
• Capable of using on a full variety of lugs and splicers
• Wide base for stability while swedging
• Provides 1400-1800 pounds pull-out resistance
• Easy to read scale for proper swedging or just hammer until the crimp feels solid, usually 1 to 2 strikes.