MidNite Classic 150 MPPT All in One Charge Controller Board
Pre-Wired & Ready To Go
Comes with MidNite Solar Battery Temperature Sensor & Solar Surge Suppression Device
This board will allow for up to 5 strings of 150 volt PV power to be combined and sent to the MidNite Classic 150 charge controller for up to 96 amps of battery charging capability. The Classic 150 is designed to work with 12, 24, 36, 48, 60, and 72 volt battery banks.
12 volt charging capacity: 14.4 volts (12 volt battery bank) @ 96 amps
(1380 watts of solar input power)
24 volt charging capacity: 28.7 volts (24 volt battery bank) @ 94 amps
(2700 watts of solar input power)
48 volt charging capacity: 58.4 volts (48 volt battery bank) @ 83 amps
(4847 watts of solar input power)
Can you add more solar? Yes! The Classic will ignore the extra power if it exceeds its limits.
The benefit: More power into your batteries before and after peak hours!
The PV incoming power is routed through five separate breakers, then converted by one of the most advanced MPPT charge controllers on the market to the most efficient charging algorithm and charging amperage available. This board connects to your battery bank, routed through a DC circuit breaker, for added security and fire protection! This step is often neglected and is essential to installing to code.
Heavy gauge cleanly galvanized steel mounting board
Lithium battery charging capable
Features folded ends and pre-punched wall mounting holes
One MNPV6 allows 5 strings of solar input of up to 150 volts input for the MidNite Classic charge controller
One box houses a MidNite 100 amp double pole breaker on the battery side of the controller for safety that also serves as a convenient disconnect
The other combiner box houses five 150 volt MidNite PV breakers that also serve as convenient separate solar string disconnects
MidNite Classic 150 charge controller
Simply one of the most efficient MPPT controllers on the market - made in the USA
Two 8 foot heavy duty pre-wired #4 gauge flexible battery cables with lugged & heat shrink sealed battery ends
5 sets of solar PV pre-wired MC4 connectors
All components are internally grounded to the board which allows for easy grounding
Wiring is housed in electrical EMT conduit
Plug and play: Simply bolt or screw unit to the wall and make your PV and battery bank connections
Perfect for on grid or back up power, off grid, boat and RV use
MidNite Solar's battery temperature sensor ensures batteries do not overheat in charging cycle
Maximizes performance for your inverter or charge controller
Sensor is attached to a 15' cable
Missouri Wind and Solar's trained staff is here to answer any technical questions you may have!
The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers at an incredible price.
MidNite Classic 150 Features:
150 operating voltage
Max current out: 96 amps
ETL listed to UL1741 and CSA
Exclusive HyperVOC extends VOC limits
Built in DC-GFP and Arc Fault Detector
Charge Controller Specifications:
Dimensions: 14.9"L x 6"W x 4"D
Warranty - 5 year manufacturer
Listed by ETL for US & Canada
CE Certified Listed
FCC Class B Listed
Made in the USA
Charge Controller Warranty:
MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and they will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.
If you are permitting any battery based system, the Classic is the only controller that has Arc fault integrated. That will save on a costly arc fault combiner.
The Classic with Our Freedom II Wind Turbine:
Must Ship via UPS or Freight to Physical Address