Description
SkyMAX 60 Amp DC to DC Converter
The SkyMAX 60 Amp DC to DC Converter has a wide input voltage from 18 to 35V, stable output voltage at 12V and works for appliances from 0.5AMP to 60AMP automatically. Rated 100% full power, full stable output current and burn-in test. Unit is waterproof sealed and surface mountable. Over-current, over-voltage protections, over-temperature shutdown, short-circuit and reverse polarity protections.
Specifications
- Type: DC/DC Converters
- Certification: CE
- Certification: RoHS
- Size: 5.9X5X2.48In
- Input Voltage Range: 18-35 V DC
- Output Voltage: 12 V DC
- Output Frequency: 100KHZ
- Output Type: Single
- Output Power Maximum: 720W
- Weight: 3.3Lb
- Output Current: 60A
- Line Regulation: ±0.2%
- Load Regulation: ±0.2%
- Temperature Coefficient: ±0.03%/°C
- Cooling: Free Air Convection
- Enclosures: IP68
- Safety Approvals: ISO 7637-2:2004
- Warranty: 2 Years
Related Products
SkyMAX 40 Amp DC to DC Converter
SkyMax Energy
$89.99
SkyMAX 40 Amp DC to DC Converter
The SkyMAX 40 Amp DC to DC Converter has a wide input voltage from 18 to 40V, stable output voltage is 12V and works for appliances from 0.5AMP to 40AMP...
SolarEdge Optimizer
SolarEdge
$115.28
SolarEdge Power Optimizers The SolarEdge Power Optimizer is a DC/DC converter which is connected by installers to each PV module, replacing the traditional solar junction box. The SolarEdge...
5 Amp 24V to 12V DC-DC Converter
Aims Power
$40.00
5 Amp 24V to 12V DC-DC Converter This compact step-down DC-DC converter has an input voltage of 24 VDC nominal (range 20 VDC to 37 VDC) to a highly regulated output voltage of 12 VDC nominal at 5...
Solar Air Conditioner/Heater TKFR-60GW/DC
$2,105.72
DC Air Conditioner Features:Freeze PreventionLED DisplaySleep Mode8 Hour Off TimerSmart Timer OperationSolar Air Conditioner
SkyMax MPPT 60 Amp Charge Controller
SkyMax Energy
$299.99
Don't worry about adding too much solar! Controller has automatic self limiting feature. As long as your panels are wired within the voltage range, the controller will limit the output to the battery...