3 Phase Brake Switch

with Short Circuit Brake in a Steel 3 Gang Box

for use with AC or DC output wind turbines

50 amp, 3-phase switch with short circuit brake works with 12 volt to 250 volt systems. Designed for 1500 watt and smaller turbines.

Simple yet perfect for small turbine installations, this 3-phase switch uses a specialized switch to provide both disconnect capability as well as braking by shorting out the 3 wires of the stator. Although designed specifically for 3-phase turbines it works equally well for single phase AC turbines as well as DC turbines. Assembled in the USA using Global Materials.

Switch Positions:

• Up: Turbine is connected to the battery or rectifier (switch is closed).
• Middle: Turbine is fully disconnected (free spinning).
• Down: Turbine wires are shorted together (brake is on).

This switch will handle 2500 watts continuously.

Rated at:

• 10 Amps at 250 Volts
• 15 Amps at 125 Volts
• 25 Amps at 60 Volts
• 40 Amps at 30 Volts
• and 50 Amps at 15 Volts

Documents:

• Instructions & Wiring Diagram