Product Description
Wind Turbine Tail Kit with Optional Mounting Bracket
Wind Turbine Tail Kit with Optional Mounting Bracket
Made with all steel construction, this is the same tail we now use on our wind turbines at our store in Seymour, MO. We've added even more strength and stability by using the new arms which bolt to the top and bottom of our mounting bracket (optional) using eight 1/4 x 1 inch bolts and nylock nuts.
Yes, it has style but it performs even better than expected. Tracking the wind with the proper equipment is essential for any wind turbine's power output. Years of observation, testing, and research go into all of our designs.
Extra wide tail fin for the best wind tracking.
Short Tail Kit Includes:
- One hot dipped galvanized tail fin
- Tail fin cut from 16 gauge steel
- Two hot dipped galvanized tail arms
- ALL STEEL CONSTRUCTION
- All components are treated and do not require painting
- One gray powder coated tail fin
- Tail fin cut from 16 gauge steel
- Two gray powder coated tail arms
- ALL STEEL CONSTRUCTION
- All components are treated and do not require painting
Freedom PMG Tail Kit |
Freedom II PMG Tail Kit | |
Compatible With |
Delco style PMAs, Freedom 1600 watt PMGs | Freedom II 2000 watt PMGs |
Length | 33 1/4 Inches (844.55 mm) | 39 1/2 Inches (1003.3 mm) |
Assembled Length |
40 1/2 Inches (1028.7 mm) | 51 Inches (1295.4 mm) |
Tail Height | 29 Inches (711.2 mm) | 35 Inches (889 mm) |
Optional Mounting Bracket:
- Fixed bracket for PMGs with 6 5/8 inches to 7 3/16 inch bolt centers
- Two long mounting bolts and spacers
- Mounting hardware
- Special locknuts that can never vibrate loose
- Locking collar with nylon washer
- Pipe hanger fits 1 1/2 inch steel water pipe and allows for easy turning
- (A simple way to mount almost any alternator on a 1 1/2 inch water pipe used as a wind turbine mast)
Mounting Bracket Specifications:
Freedom PMG Mounting Bracket (freewind_brk) | Freedom II PMG Mounting Bracket (freewind_ii_brk) | |
Mounting Bracket Height: | 8 3/4 Inches (22.2 mm) | 8 3/4 Inches (22.2 mm) |
Mounting Bolt Length: | Four 4 inch (101.6 mm) long mounting bolts | Four 8 inch (203.2 mm) long mounting bolts |
Fits Tower Pole Size: | 1 1/2 Inches (1 7/8 Inches OD) | 1 1/2 Inches (1 7/8 Inches OD) |
Special Coating: | Hot dipped galvanized | Hot dipped galvanized |
Mounting Bracket Material: | Steel | Steel |
Watch the video below as Jeff explains how to assemble the Missouri Stars and Stripes wind turbine tail (components in the video may vary from the item listed).