Description
Wind Turbine Blade Hubs
Our Wind Turbine Blade Hubs have a 17 mm hub center mounting hole that fits most older GM/si type alternators. If your PMA or PMG rotor shaft isn't 17 mm, see our wind turbine hub adapters to make them compatible with our hubs.
Hub Specifications:
- Raptor Generation 4 Blade Hubs:
- 1/4" bolt holes are 15/16" center to center
- Raptor Generation 5 Blade Hubs:
- 5/16" bolt holes
- Bolt holes are spaced perfectly for our Raptor blades
- Each wind turbine hub is laser cut for precision
- Thick steel hubs are perfectly balanced, will not bend
- Evenly spaced cooling holes to prevent overheating
- Made in the USA
5 Blade Hub |
6 Blade Hub
(Use for 3 or 6 blades)
|
7 Blade Hub |
9 Blade Hub
(Use for 3 or 9 blades)
|
11 Blade Hub | G5 3 Blade Hub | G5 5 Blade Hub | |
Blade Series: | Raptor Generation 4 or similar | Raptor Generation 5 or similar | |||||
Thickness: | 3/16 in (4.76 mm) | ||||||
Diameter: | Varies with model | ||||||
Weight: | Varies with model | ||||||
Special Coating: | Zinc plated/Powder Coated |
*These Missouri Wind and Solar hubs are required for the Raptor Blade warranty.