Product Description
Wind Turbine Shaft Adapter
You can now use our wind turbine hub and blade sets on your Ametek, Wind Blue, treadmill, or other wind turbine motors with 1/2 Inch (12.7 mm), 5/8 Inch (15.87 mm), or 3/4 Inch (19.0 5 mm) shafts. Convert your wind turbine shaft to the perfect hub size to build your ideal custom wind turbine!
Wind Turbine Shaft Adapter Features:
- Made to military specifications
- Made with your safety in mind
- Made with a wide shoulder for proper hub seating, not on the threads
- Fine thread to prevent loosening with constant vibration
- Comes with 5/16 inch set screws, nut, and lock washer
- Fully zinc coated
- Made in the USA
Adapter: |
1/2 x 1/2 in |
1/2 x 5/8 in (12.7 x 15.87 mm) |
17 mm x 1/2 in (17 x 12.7 mm) |
17 mm x 5/8 in (17 x 15.87 mm) |
17 mm x 3/4 in (17 x 19.05 mm) |
Windmax Adapter |
Model #: | RHA05-12/12 | RHA05-12/58 | RHA12 | RHA58 | RHA34 | FIXMAX |
Shaft Diameter: | 1/2 Inch (12.7 mm) | 5/8 Inch (15.87 mm) | 1/2 Inch (12.7 mm) | 5/8 Inch (15.87 mm) | 3/4 Inch (19.05 mm) |
Windmax & other PMAs |
Hub (Center Hole Diameter): | 1/2 Inch (12.7 mm) | 1/2 Inch (12.7 mm) | 17 mm | 17 mm | 17 mm | 17 mm |
Thread TPI: | 20 TPI | 25 TPI | 25 TPI | 25 TPI | 25 TPI | 25 TPI |
Set Screw Size: | 5/16 Inches (7.94 mm) | 5/16 Inches (7.94 mm) | 5/16 Inches (7.94 mm) | 5/16 Inches (7.94 mm) | 5/16 Inches (7.94 mm) | 5/16 Inches (7.94 mm) |
Special Coating: | Gold zinc plated | |||||
Country of Manufacture: | Made in the USA |