Missouri Wind and Solar

Wind Turbine Shaft Adapter

Write a Review

SKU:: RHA
UPC:
MPN:

€17,81 - €18,75

Current Stock:

Quantity:

Description
0 Reviews

Description

You can now use our wind turbine hub and blade sets on your Ametek, Wind Blue, treadmill, or other wind turbine motors with 1/2 Inch (12.7 mm), 5/8 Inch (15.87 mm), or 3/4 Inch (19.0 5 mm) shafts. Convert your wind turbine shaft to the perfect hub size to build your ideal custom wind turbine!

Wind Turbine Shaft Adapter Features:

Made to military specifications
Made with your safety in mind
Made with a wide shoulder for proper hub seating, not on the threads
Fine thread to prevent loosening with constant vibration
Comes with 5/16 inch set screws, nut, and lock washer
Fully zinc coated
Made in the USA

Adapter:	1/2 x 1/2 in (12.7 x 12.7 mm)	1/2 x 5/8 in (12.7 x 15.87 mm)	17 mm x 1/2 in (17 x 12.7 mm)	17 mm x 5/8 in (17 x 15.87 mm)	17 mm x 3/4 in (17 x 19.05 mm)	Windmax Adapter
Model #:	RHA05-12/12	RHA05-12/58	RHA12	RHA58	RHA34	FIXMAX
Shaft Diameter:	1/2 Inch (12.7 mm)	5/8 Inch (15.87 mm)	1/2 Inch (12.7 mm)	5/8 Inch (15.87 mm)	3/4 Inch (19.05 mm)	Windmax & other PMAs with a 16 mm RH thread
Hub (Center Hole Diameter):	1/2 Inch (12.7 mm)	1/2 Inch (12.7 mm)	17 mm	17 mm	17 mm	17 mm
Thread TPI:	20 TPI	25 TPI	25 TPI	25 TPI	25 TPI	25 TPI
Set Screw Size:	5/16 Inches (7.94 mm)	5/16 Inches (7.94 mm)	5/16 Inches (7.94 mm)	5/16 Inches (7.94 mm)	5/16 Inches (7.94 mm)	5/16 Inches (7.94 mm)
Special Coating:	Gold zinc plated
Country of Manufacture:	Made in the USA