Pytes V5 5.12kWh 51.2V 100Ah Lithium Iron Phosphate Battery

The Pytes V5 LFP Battery is a lithium iron phosphate (LFP) battery is a well designed, high performance battery with a powerful BMS for added safety. Compact and easy to install, the Pytes V5 is maintenance free and can be wired in parallel to add more storage capacity. Each battery has a nominal voltage of 51.2V and nominal capacity of 100Ah, adding up to 5.12kWh of nominal energy.

With a low-consumption built in heater that automatically starts in cold temperatures, you can safely charge at below freezing without damaging the battery. The V5 also has a higher charge and discharge rate of 100A making it compatible with residential, small commercial, and telecommunications systems.

Heating:

The integrated heating function has a typical operating range of -4°F to 50°F. If the battery temperature falls below 41°F, the heating feature is initiated. Using charging current from the charging source, the heater will raise the battery temperature up to 50°F. The heater consumes up to 180W (per battery) from the charging source and will heat the battery at up to 10°C/hour. Because the heater is powered by the charging source, it does not affect the battery's state of charge (SOC).

If the battery temperature is between 35°F - 41°F (2°C - 5°C) the heater will initiate and the battery will be charged at the same time until the battery reaches a temperature of 50°F (10°C), at which point the heater will turn off and the battery will continue to be charged. If the battery is below <35°F (<2°C), the charging current will only be directed into the heating system until the battery rises above 41°F (5°C), at which point the battery will be charged normally.

Spacing:

The Pytes V5° model requires spacing around each battery to allow for connections to be made using the busbars and to facilitate cooling. It is recommended to use V5° compatible racking to achieve the 4U or 7" spacing.

Features:

• Higher Charge & Discharge Rate: Maximum Charge and Disharge Current 100A / fully chargd in  hour
• Freezing Temperature Charging: The smart heating system allows for charging in freezing temperatures
• Long-lasting and Efficient: ≥6000 cycles @90%DOD
• Easy Connection: Up to 300A confluence current in parallel
• Smart Energy Management: Monitor and optimize energy usage, maximize longevity, remote upgrading

Specifications:

• Nominal Voltage: 51.2V
• Nominal Capacity: 100Ah
• Nominal Energy: 5.12kWh
• Chemistry: Lithium Iron Phosphate(LiFePO4)
• Maximum continuous charge current: 100A(1C)
• Maximum continuous discharge rate: 100A(1C)
• Communication Protocol: RS485, CAN
• Dimension(L*W*H): 17.32"x 20.87"x 5.51"
• Weight: 97 lbs

What's Included:

• (2) Flexible Busbar 300A
• (1) Cascade communication Cable CAN / RS485
• (1) 10AWG Grounding Cable