Solar PV Cable #8 AWG UL Approved (by the foot)

Solar PV Cable #8 AWG UL Approved Cross-Linked Polyethylene Insulated18 - 750 MCM • 2000 Volts • -40°C to 90°C Wet and Dry DescriptionPhotovoltaic cable has a chemically cross-linked polyethylene insulation. ApplicationsAppropriate for...

1000 Amp Battery Combiner Box

MidNite 1000amp battery combiner box includes a 1000A Positive and Negative bus bar with 3/8 inch studs. Cables can be double lugged and the copper bus bar can be drilled for additional mounting locations. We recommend you use 3/8 inch stainless bolts if...

Lithium Battery Combiner Box

The MidNite Solar MNLBC is a 14 string non disconnecting lithium battery combiner. Combines up to 14 strings of batteries Up to 1/0 wire per input Rated for up to 80 volts DC maximum 250 amps maximum 10 each 3/4 inch knock outs for cable entry 2 each 2...

Solar Photovoltaic MC4 Bulkhead Connector

ANL Fuse Holder Block

ANL Fuse Holder BlockANL inline fuse block holder features: Accepts our high current ANL fuses Ring terminal or slide in connections Can be connected in parallel Compatible with 12 volt, 24 volt or 48 volt DC volt systems Fuses sold separately Use with...

3 Wire Slip Ring Kit With 90A 3 Wire Slip Ring

90 Amp 3 Wire Slip Ring Kit for Wind Turbine Generators Kit Includes: (12) inches of 3/8 inch double wall heavy duty heat-shrink tube with air tight mastic inner seal (6) pieces 10-12 gauge butt connectors (1) 3 wire custom 90 amp AC/DC slip ring Get...

Short Bridge Aluminum Resistor Bar

Short Bridge Aluminum Resistor Bars Use the short bridge aluminum resistor bar to connect two dump load resistors together as shown in the additional images. Product Specifications: 1 5/8 x 1 1/16 x 1/8 inches 4 grams  

Long Bridge Aluminum Resistor Bar

Long Bridge Aluminum Resistor Bars Use the long bridge aluminum resistor bars to connect four or more dump load resistors together as shown in the image below Product Specifications: 4 5/8 x 1 1/2 x 1/8 inches 22 grams The bridge bar pair can also be...

90 Amp 3 Wire Slip Ring for Wind Turbine Generators

90 Amp 3 Wire Slip Ring for Wind Turbine GeneratorsThese 90 Amp 3 wire slip rings are small and compact with OD 22.00 mm * L 45 mm, standard, off-the-shelf. Color-coded lead wires are used on both the stator and rotor for simplified electrical...

180 Amp 6 Wire Slip Ring Kit

180 Amp 6 Wire Slip Ring Kit for Wind Turbine Generators   Slip Ring Kit Includes: 24 inches of 3/8 inch double wall heavy duty heat-shrink tube with air tight mastic inner seal 12 pieces 10-12 gauge butt connectors One 6 wire custom 180 amp...

180 Amp 6 Wire Slip Ring for Wind Turbine Generators

Keep your cable from twisting in the tower.These 180 Amp 6 wire slip rings are small and compact with OD 30.00 mm x L 66 mm, standard, off-the-shelf. Color-coded lead wires are used on both the stator and rotor for simplified electrical connections,...

Waterproof ABS Cable Entry Housing

The ABS Solar Panel Cable Entry Housing can be used for a double or single cable entry. This entry gland is perfect for getting cables from outside to inside and keeping it fully waterproof.It's ideal for mounting solar panels on vehicles and boats, as...