MidNite Solar MNPV6 PV Combiner

MidNite Solar MNPV6 PV Combiner Photo shows MNPV6 with either breakers or fuses (not included)Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp plus bus bar for breakers and 80 amp bus bar for fuses. Breakers/fuse holders...

MidNite Solar MNPV3 PV Combiner

MidNite Solar PV Combiner Photo shows MNPV3 with either breakers or fuses. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Breakers/fuse holders sold separately. Type 1 environmental ratingWarranty - 5 yrs...

MidNite Solar MNPV12 PV Combiner

MidNite Solar MNPV12 PV Combiner Photo shows MNPV12 with either breakers or fuses (not included). Breakers/fuse holders sold separately.Type 1 environmental ratingWarranty - 5 yrs.Listed by ETL for US & CanadaMade in the USADescription: Enclosure...

6 x 6 Inch MC4 Solar Combiner Box

6 x 6 Inch MC4 Solar Combiner Box 100 Amp, 6 circuit (12 connectors), MC-4 Solar Combiner BoxPerfect for paralleling solar panels. The enclosure can be mounted outdoors with no additional protection from rain and snow. There are 6 male MC-4 connectors on...

1/2 Inch to 29/32 Inch Hose Clamp

Necessary for Marine, Underground & Other High Corrosion ApplicationsThe streamlined configuration allows for installation in tight fitting or difficult to reach areas. This clamp creates high sealing pressure with only 10 to 15 in/lbs of...

3 Foot Cable for the MidNite Network

3 foot cable for the MidNite network. Used to network MidNite products together. Warranty - 5 yrs. * Made in the USA

Charge Controller to Battery Connection Cables with Lug Terminals

Charge Controller to Battery Connection Cables with Lug Terminals Available in #10 AWG or #4 AWG. Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery. Each pair is made from high-quality...

Charge Controller to Battery Connection Cables with Alligator Clamps

Charge Controller to Battery Connection Cables with Alligator Clamps #10 AWG - UL Approved - 600 Volt - Double Jacketed Copper   Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery...

Terminal Ends / Tinned Copper Lugs (2/0 AWG - 8 AWG)

Tin plated copper lug in assorted sizes for making wind turbine cables, battery cables, inverter cables, solar panel cables, etc. Note: The lower the number the larger the lug. For example 2/0 AWG lugs are larger than 2 AWG lugs. The #/0 indicates a...

Tinned Copper Butt Connectors

Tinned Copper Butt Connectors manufactured from soft drawn pure oxygen free copper. A must for splicing two cables together.  This process gives the best electrical results possible for maximum current flow and tinned for corrosion resistance and...

3/8 Inch Spade Terminals

Perfect for Making Connections to Wind Turbine Bridge Rectifiers Heavy Duty 3/8" spade connectors with nylon insulators - Available in multiples of 5. Fits our Missouri Wind Turbine 30, 40, 50, 70, 80, and 90 amp bridge rectifier! Fits 8 / 10 / 12 AWG...

10/12 AWG Crimp On Ring Terminals - Pack of 8

Accepts 10 AWG or smaller wire - Sold in quantities of eight ring terminals. Most solar panels come with 10 AWG or smaller wire. Use to make electrical connections with solar panels, bridge rectifiers, etc.  Bolt four of them...