Cable and Electrical
Save time and money - get your wire, terminal ends, and cable connectors all in one place. No need to shop around!
- Disconnect Switches
- Cable
- Busbars & Combiner Boxes
- Fuses and Breakers
- Surge Protection
- Blocking Diodes
- 3-Phase Rectifiers
- Solar Panel Connectors
- Terminal Ends
-
Solar Panel Branch Connector Pair
$6.83Branch Connectors for Solar PanelsConnect two solar panels in parallel using our solar panel branch connectors. Features: Used for making safe connections for wiring solar panels in series or parallel UV Resistant Acc to DIN V VDE V 0126-3/12.06 UL...$6.83 -
MC4 Solar Connector Pair
$1.49Multi-Contact MC4 Connector Pairfor Solar Panel Connections 1 pair MC4 connectors - 1 male, 1 female with pins Designed for connecting solar panel photovoltaic systems, these solar panel connectors are made to withstand the weather and give safe...$1.49 -
3 Way MC4 Solar Panel Branch Cable Connector Pair
$6.383-to-1 Solar Panel MC4 Connectors 1 Pair M/FFF and F/MMM - Y Style This Y type three to one MC4 branch connector is perfect for connecting three solar panels in parallel.This pair includes 1 male to 3 female (M/FFF) and 1 female to 3 male (F/MMM)...$6.38 -
MC4 Solar Disconnect Spanner Wrench
$3.99This is a multi-contact solar connector disconnect spanner tool for assembling and disassembling MC4 male/female connectors. This tool is very light yet strong. Its small size and double-quick screw down make it easy to use, saving you time in...$3.99 -
MidNite Solar Transition Box
MidNite Solar
$129.32MidNite Solar Transition BoxMNTRANSITION 1000 Volt Transition Box The MidNite Solar Transition Box is made specifically for transitioning from PV wire to a more economical standard wire. It is rated for 1000 VDC and can accommodate two isolated...$129.32 -
MidNite Solar MNPV6 PV Combiner
MidNite Solar
$142.87MidNite Solar MNPV6 PV Combiner Photo shows MNPV6 with either breakers or fuses (not included)Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp plus bus bar for breakers and 80 amp bus bar for fuses. Breakers/fuse holders...$142.87 -
MidNite Solar MNPV3 PV Combiner
MidNite Solar
$115.19MidNite Solar PV Combiner Photo shows MNPV3 with either breakers or fuses. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Breakers/fuse holders sold separately. Type 1 environmental ratingWarranty - 5 yrs...$115.19 -
MidNite Solar MNPV12 PV Combiner
MidNite Solar
$245.27MidNite Solar MNPV12 PV Combiner Photo shows MNPV12 with either breakers or fuses (not included). Breakers/fuse holders sold separately.Type 1 environmental ratingWarranty - 5 yrs.Listed by ETL for US & CanadaMade in the USADescription: Enclosure...$245.27 -
6 x 6 Inch MC4 Solar Combiner Box
$121.926 x 6 Inch MC4 Solar Combiner Box 100 Amp, 6 circuit (12 connectors), MC-4 Solar Combiner BoxPerfect for paralleling solar panels. The enclosure can be mounted outdoors with no additional protection from rain and snow. There are 6 male MC-4 connectors on...$121.92 -
1/2 Inch to 29/32 Inch Hose Clamp
$0.75Necessary for Marine, Underground & Other High Corrosion ApplicationsThe streamlined configuration allows for installation in tight fitting or difficult to reach areas. This clamp creates high sealing pressure with only 10 to 15 in/lbs of...$0.75 -
3 Foot Cable for the MidNite Network
MidNite Solar
$7.943 foot cable for the MidNite network. Used to network MidNite products together. Warranty - 5 yrs. * Made in the USA$7.94 -
Charge Controller to Battery Connection Cables with Lug Terminals
Missouri Wind and Solar
$24.99 - $77.99Charge Controller to Battery Connection Cables with Lug Terminals Available in #10 AWG or #4 AWG. Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery. Each pair is made from high-quality...$24.99 - $77.99 -
Charge Controller to Battery Connection Cables with Alligator Clamps
Missouri Wind and Solar
$28.10Charge Controller to Battery Connection Cables with Alligator Clamps #10 AWG - UL Approved - 600 Volt - Double Jacketed Copper Description: This pair of cables was designed specifically to quickly connect your charge controller to the battery. Each...$28.10 -
Terminal Ends / Tinned Copper Lugs (2/0 AWG - 8 AWG)
$1.89 - $2.59Tin plated copper lug in assorted sizes for making wind turbine cables, battery cables, inverter cables, solar panel cables, etc. Note: The lower the number the larger the lug. For example 2/0 AWG lugs are larger than 2 AWG lugs. The #/0 indicates a...$1.89 - $2.59 -
Tinned Copper Butt Connectors
$1.64Tinned Copper Butt Connectors manufactured from soft drawn pure oxygen free copper. A must for splicing two cables together. This process gives the best electrical results possible for maximum current flow and tinned for corrosion resistance and...$1.64 -
3/8 Inch Spade Terminals
$5.99 - $8.49Perfect for Making Connections to Wind Turbine Bridge Rectifiers Heavy Duty 3/8" spade connectors with nylon insulators - Available in multiples of 5. Fits our Missouri Wind Turbine 30, 40, 50, 70, 80, and 90 amp bridge rectifier! Fits 8 / 10 / 12 AWG...$5.99 - $8.49 -
10/12 AWG Crimp On Ring Terminals - Pack of 8
$0.90Accepts 10 AWG or smaller wire - Sold in quantities of eight ring terminals. Most solar panels come with 10 AWG or smaller wire. Use to make electrical connections with solar panels, bridge rectifiers, etc. Bolt four of them...$0.90 -
Vinyl Butt Connectors
$0.99 - $2.998 Pack of Connectors - Ideal for joining two cut wire ends. Butt Splice Connector Features: Vinyl Grip Uses Chamfered Barrel Ends Provides Fast Easy Wire Insertion from Both Ends Built In Wire Stop for Correct Positioning Must Be Crimped at Ends$0.99 - $2.99 -
MidNite Solar Surge Protection Device
MidNite Solar
$91.44Midnite Solar Surge Protection Device The MidNite Solar Surge Protector Device (MNSPD) is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device...$91.44 -
ANL Fuse
$1.11 - $3.45Protect your batteries and equipment with our high current ANE fuses. Be sure to check out our ANE fuse holder as a perfect companion piece! Not sure which fuse you need? Use the chart below to help determine the size. Inverter...$1.11 - $3.45