Victron Energy

Victron Energy SCC110020160R SmartSolar 100|20 48V MPPT Charge Controller

Write a Review
  • Victron SmartSolar MPPT 100|20 Top View
  • Victron SmartSolar MPPT 100|20 Front View
  • Victron SmartSolar MPPT 100|20 Left View
  • Victron SmartSolar MPPT 100|20 Right View
  • Victron SmartSolar MPPT 100|20 Connection View


The Victron SmartSolar charge controller maximizes the process of gathering energy from your solar panels and directing it to your batteries. Using the fastest technology, the SmartSolar MPPT maximizes the process to achieve full charge in the shortest possible time while maintaining battery health and exting its life.E

Capable of recharging a severely depleted battery, the SmartSolar can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or damaged.


  • MPPT Ultra Fast Maximum Power Point Tracking: Constant monitoring of your solar panels ensure that every drop of available power is harvested for storage.
  • Remote Monitoring and Control: If your installation is connected to the internet with a GX device, the Victron Remote Management Portal provides access to the full power of your MPPT.
  • Load Output: The intelligent load output function prevents damage caused by running batteries "flat". You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries.
SmartSolar Charge Controller MPPT 100/20-48V
Battery voltage (auto select) 12/24/48 V
Rated charge current 20 A
Nominal PV power, 12 V 1a,b) 290 W
Nominal PV power, 24 V 1a,b) 580 W
Nominal PV power, 48 V 1a,b) 1160 W
Max. PV short circuit current 2) 20 A
Automatic load disconnect Yes
Max. PV open circuit voltage 100 V
Peak efficiency 98%
Self-consumption – load on 26 / 20 / 19 mA
Self-consumption – load off 10 / 8 / 7 mA
Charge voltage 'absorption' 14.4 V / 28.8 V / 57.6 V (adj.)
Charge voltage 'float' 13.8 V / 27.6 V / 55.2 V (adj.)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Max. continuous load current 20 A / 20 A / 1 A
Low voltage load disconnect 11,1 V / 22,2 V / 44,4 V or 11,8 V / 23,6 V / 47,2 V or Battery Life algorithm
Low voltage load reconnect 13,1 V / 26,2 V / 52,4 V or 14 V / 28 V / 56 V or Battery Life algorithm
Protection Output short circuit / Over temperature
Operating temperature -30 to +60 °C (full rated output up to 40 °C)
Humidity 95 %, non-condensing
Data communication port VE.Direct (see the data communication white paper on our website)
Color Blue (RAL 5012) 
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,65 kg
Dimensions (h x w x d) Dimensions (h x w x d)
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
Stored Trends
Data stored Battery voltage,current and temperature, as well as load output current, PV voltage and PV current.
Number of days trends data is stored 46
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1 V
2) A PV array with a higher short circuit current may damage the controller.
View AllClose

0 Reviews

View AllClose