MidNite Solar

30A, 300VDC UL489 listed din rail mount breaker from MidNite Solar. Mounts to a standard 35mm DIN rail ETL Listed for US and Canada

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be...

POLARIZED Environmental Rating - Type 1 (Indoor) Breaker Torque Value: 20 In-Lbs (2.3NM) Current Rating - 15A DC Voltage Rating - 600VDC Wire Size Range - 14 to 6 AWG Width - 1 inch (26mm) Number of...

POLARIZED Environmental Rating - Type 1 (Indoor) Breaker Torque Value: 20 In-Lbs (2.3NM) Current Rating - 30A DC Voltage Rating - 600VDC Wire Size Range - 14 to 6 AWG Width - 1 inch (26mm) Number of...

MidNite Solar MNPV6-250 Busbar 1/8" thick tin plated copper for use with up to three 300VDC MidNite circuit breakers. The 300V circuit breakers have input and output connections on the top surface...

MidNite Solar MNPV6-250 PV Combiner Box Photo shows MNPV6-250 with 3 of the MNEPV 300 volt breakers (not included)Includes 15 position PV negative bus bar, 14 position ground bus bar, 168 amp plus...

POLARIZED Environmental Rating - Type 1 (Indoor) Breaker Torque Value: 20 In-Lbs (2.3NM) Current Rating - 20A DC Voltage Rating - 600VDC Wire Size Range - 14 to 6 AWG Width - 1 inch (26mm) Number of...

DIY Inverter 24VDC Offering a simple, all-in-one installation and flexible programming, the new MidNite Solar Inverter/charger DIY Series will charge virtually any battery chemistry. With excellent...

DIY Inverter 48VDC Offering a simple, all-in-one installation and flexible programming, the new MidNite Solar Inverter/charger DIY Series will charge virtually any battery chemistry. With excellent...

MidNite Solar 60 Amp MPPT Charge Controller With 60A of charging capability and up to 150VDC input, the new MNMPPT60DIY is a powerful and flexible charge controller perfect for any 12V, 24V, or 48V...

MidNite 1000amp battery combiner box includes a 1000A Positive and Negative bus bar with 3/8 inch studs. Cables can be double lugged and the copper bus bar can be drilled for additional mounting...

The MidNite Solar MNLBC is a non disconnecting combiner box for lithium batteries. Connect up to 14 battery strings in this high quality aluminum enclosure from a brand you've grown to trust...

Midnite Solar AC Clipper for Wind or Hydro Turbines The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates...

MidNite Solar Transition BoxMNTRANSITION 1000 Volt Transition Box The MidNite Solar Transition Box is made specifically for transitioning from PV wire to a more economical standard wire. It is...

MidNite Solar MNPV6 PV Combiner Photo shows MNPV6 with either breakers or fuses (not included)Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp plus bus bar for breakers...

MidNite Solar PV Combiner Photo shows MNPV3 with either breakers or fuses. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Breakers/fuse holders sold...

MidNite Solar MNPV12 PV Combiner Photo shows MNPV12 with either breakers or fuses (not included). Breakers/fuse holders sold separately.Type 1 environmental ratingWarranty - 5 yrs.Listed by ETL for...

MidNite Solar Battery Temperature Sensor Midnite Solar Battery Temp Sensor - to be used with regular version of MidNite Solar MNKID KID MPPT Charge Controller (Included with Marine version)...

Pre-Wired & Ready to Go MidNite Solar Classic 250 MPPT All in One Charge Controller Board for Solar Comes with MidNite Solar Battery Temperature Sensor & Solar Surge Suppression Device The...

MidNite Classic 200 MPPT All in One Charge Controller BoardPre-Wired & Ready To Go Comes with MidNite Solar Battery Temperature Sensor & Solar Surge Suppression Device This board will allow...