Description
Plated Steel Cushion Clamps
Use these clamps to secure your wire and cable. Please choose between 3/8 inch (9.52mm) or 1/4 inch (6.35 mm) clamp sizes.
- 3/8 inch clamps fit cable up to 1 gauge (12 mm with insulation jacket).
- Plated steel removable EPDM cushion protects loom or cable and cuts vibration.
- Mounting hole is 17/64" for 1/4" screw or bolt
Related Products

Clamp Connector for Non-Metallic Cable
$1.95 - $2.05
Clamp Connector for Non-Metallic Cable Zinc made clamp connector for use with non-metallic cable: available in 3/4" and 1" sizes. Use these connectors for the top of mounting bracket. These...

Pole Clamp for 2 3/8 Inch OD Pipe
$8.79
Pole Clamp2 3/8 InchesAdjustable pole clamp for mounting solar panels and electrical enclosures.

Nylon Cable Clamp
$0.99
The nylon material is built tough, yet is lightweight. This means a durable clamp with protection against chemicals and aging. These cable clamps also meet the UL flammability classification UL94V-2...


Fair-Rite Ferrite Clamp On Core
Fair-Rite
$19.99
BUY ONE / GET ONE FREE
A ring configuration provides the ultimate utilization of the intrinsic ferrite material properties. Toroidal cores are used ina wide variety of applications such as...


Digital Clamp Meter for DC & AC Current
$49.99
High Precision Clamp Meter
Troubleshoot your system components with this high precision clamp meter. Measures AC and DC voltage, current, resistence, and capacitance.
NCV Detection Function:...
Customers Also Viewed


Fair-Rite Ferrite Clamp On Core
Fair-Rite
$19.99
BUY ONE / GET ONE FREE
A ring configuration provides the ultimate utilization of the intrinsic ferrite material properties. Toroidal cores are used ina wide variety of applications such as...

275 Amp DC Disconnect Switch for Battery Banks and Power Sources
$14.88
DC Battery Bank Disconnect Switch with High Amp Rating
On-Off Disconnect Switch for battery banks with wind turbines, solar panels, inverters, generators, hydroelectric power and more.
DC...

3 to 1 Heat Shrink Tubing
$3.20 - $4.59
Heat Shrink Tubing Adhesive lined dual wall (mastic) heat shrink tubing shrinks to 1/3 of its original diameter when heated (creating a moisture proof, airtight, flexible seal) Available in the...


Digital Clamp Meter for DC & AC Current
$49.99
High Precision Clamp Meter
Troubleshoot your system components with this high precision clamp meter. Measures AC and DC voltage, current, resistence, and capacitance.
NCV Detection Function:...


Low Voltage DC Submersible Double Water Heater Element
Missouri Wind and Solar
$29.99
9 3/8 Inch Dual Power Submersible Water Heating Element Can be used direct with batteries, solar panels, hydroelectric generators, as a wind turbine dump diversion load. DO NOT USE GRID POWER AS IT...
On Sale
DC Breakers from 100 Amp to 250 Amp
$3.75 - $4.92
$9.99
12 Volt DC Breakers from 100 Amp to 250 Amp
**For use in 12 volt systems only**
12 Volt DC breaker with 1/4 Inch brass lugs: 150 to 250 amp models available.
Comes with manual reset lever...

MC4 Solar Connector Pair
$1.49
Multi-Contact MC4 Connector Pairfor Solar Panel Connections
1 pair MC4 connectors - 1 male, 1 female with pins
Designed for connecting solar panel photovoltaic systems, these solar panel...


DC Disconnect Switch for Multiple Battery Banks and Power Sources
$15.41
Heavy Duty DC Battery Switchfor charging two battery banks for solar and wind systemsFor 200 Amp DC applications only. For use with multiple batteries, wind turbines, solar panels, inverters,...

Clamp Connector for Non-Metallic Cable
$1.95 - $2.05
Clamp Connector for Non-Metallic Cable Zinc made clamp connector for use with non-metallic cable: available in 3/4" and 1" sizes. Use these connectors for the top of mounting bracket. These...