Description
High Precision Clamp Meter
Troubleshoot your system components with this high precision clamp meter. Measures AC and DC voltage, current, resistence, and capacitance.
NCV Detection Function: Non-contact voltage detection to check status through measuring EM field intensity without contacting any wiring.
Shutdown: If there is no operation within 15 minutes, the meter will beep three times, then auto power off after 30 seconds to save battery power.
Z/F Button Measurement: Press the Z/F button to switch the secondary function between different measurements such as AC and DC. If current is greater than 3A, the display will light up.
Technical | Range | Precision |
DC Voltage | 600mV/6V/60V/600V/600V | ±(0.5%+3) |
AC Voltage | 6V/60V/600V/600V | ±(0.8%+3) |
DC Current | 6A/60A/600A | ±(2.5%+5) |
AC Current | 6A/60A/600A | ±(2.5%+5) |
Resistance | 6000/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(1.0%+3) |
Capacitance | 10nF/100nF/1µF/100µF/1mF/20mF/100m | ±(4.0%+3) |
Frequency | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz | ±(0.5%+5) |
Duty Cycle | 1% - 99% | ±(1.0%+2) |
Temperature | -40°F - 1832 °F | ±(1.0%+2) |
Clamp Meter Features:
- Automatic/Manual Range
- Continuity Measurement
- Diode Measurement
- Data Hold
- NCV Non-Contract Voltage Detection
- Backlight
- Flashlight
- DC Current Zero
- Low Voltage Indication
- Full Range Protection
- Automatic Shutdown
- True RMS
- Low Pass Filter
- Max/Min Measurement
Specifications:
- Power: Requires (2) AAA Batteries (not included)
- Weight: 9.1 oz
- Size: 7.6 x 2.87 x 1.33 inches
- Clamp Size: Ø1*1.73 inches